Categories

False alarms and system glitches can be aggravating, and more importantly, could prevent your home’s security from working the way it should. Luckily, most issues, from false alarms to dead batteries, are straightforward to correct. Take a look at our suggestions for troubleshooting your home alarm system in Ocala. We’ll help keep your family members safeguarded and your system operating the way it should.

Test Your Home Security System In Ocala

One effective way to troubleshoot your home’s security is to test it! The latest systems allow you to put them in test mode to keep you from initiating an emergency call. Once you’re in test mode, do the following:

• Arm your system as you typically would when you leave.
• Open a door or window that uses a contact sensor, or try to set off another sensor. Close the door or window once you’re finished so it doesn’t trigger the alarm as you switch the system back on.
• Allow the alarm to go off for 60 seconds to make sure a signal is sent to the security provider and an entry is created in the alarm activity log.
• Continue testing sensors as needed
• Review the alarm’s activity log to confirm functionality.

Rest assured, monitoring professionals will know that your alarm system is undergoing a test. Just be sure to switch off test mode when done. It’s wise to test every other month or whenever you make changes to your home’s internet or phone service.

Check The Placement And State Of Motion Sensors

Although an integral part of your alarm system, motion detectors are prone to false alarms. Do your part to prevent them with a few straightforward troubleshooting steps.

• Conduct a visual check. Are there objects that could move within the sensor’s detection area, like a window treatment caught in a breeze?
• Is the sensor clean? Grime, dirt, and cobwebs can lead to malfunctions. Ensure the face is clean.
• Does the motion detector come with pet immunity you can enable? Some can be set to ignore pets up to 100 pounds.
• When was the battery last replaced? A low battery can impact performance or result in false alarms.
• Is the sensor facing a heat source? Too much heat from a fireplace, direct sun, or something else can cause an alarm.

Keep Batteries Ready And Look Out For Low Battery Warnings

One of the great aspects of new home security systems is that they’ll alert you when batteries are getting low. If your system uses a app or control panel, you’ll typically find messages there. Depending on the alarm, you may hear an intermittent beep when batteries are low. 

Contact sensors, smoke detectors, motion sensors, and other wireless devices have batteries that need to be replaced every year or two. It’s wise to keep batteries ready and set a replacement schedule. Many systems also come with a backup battery for the central control panel. This backup battery keeps your system running if your power goes out and should charge back up once power is restored. If it doesn’t recharge, you should replace it.

Troubleshooting Is Effortless With ADT Home Security In Ocala 

As the top name in home security, ADT creates systems that supply superior functionality and convenience. Switching to test mode is easy through the ADT+ app or MyADT.com, and you’ll always receive notifications when a sensor battery is running low. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system ideal for your Ocala home. Place a call to (352) 325-7261 or complete our form today!